sgc1045s surface mount schottky rectifier reverse voltage 45v forward current 10a www.goodark.com 1/4 2014.03-rev.a features ? schottky barrier diodes ? low forward voltage drop ? low leakage current ? moisture sensitivity: level 1 per j std 020 ? m o i s t ure sens iti v it y: l eve l 1 , per j - std - 020 ? solder dip 260 c, 10 s ? low profile - typical height of 1.1 mm ? heatsink design ? high temperature soldering guaranteed: 260/10 seconds ? halogen-free according to iec 61249-2-21 definition anode ? 1 anode ? 2 cathode & ? heatsink esgc (to \ 277) ??? typical applications for low voltage high frequency inverters, dc/dc converters and polarity protection application. maximum ratings (ta = 25 c unless otherwise noted) pt sbl sgc1045s uit vrrm v vrms v vdc v if(av) 1) if(av) 2) ifsm a a 5.0 peak forward surge current 8.3 ilhlfi 280 paramete r symbol sgc1045s unit maximum repetitive peak reverse 45 maximum rms voltage 31.5 maximum dc blocking voltage 45 maximum average forward rectified current 10.0 ifsm a tj, tstg c electrical characteristics (ta = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit ms single half sine-wave superimposed on rated load 280 operating junction and storage temperature range -55 to +150 i f =1a i f =2a i f =10a i f =1a i f =2a i f =10a i f =1a i =2a instantaneous forward voltage t a =25 v f 0.30 0.35 t a =85 0.22 0.27 0.25 0.3 0.36 0.42 t =125 y i f = 2a i f =10a c j nf r ja r jc r jm note:1),the thermal resistance from junction to ambient,case or mount,mounted on p.c.b with 3030mm copper pads,2 oz,fr4 pcb 2):mounted on recommended copper pad area,free air. /w j untion to case 35 j untion to mount 20 typical junction capacitance 4.0 v, 1 mhz 0.95 typical thermal resistance 1) j untion to ambient 80 ma t a =85 14.5 18 t a =100 35 39 0.3 instantaneous reverse current rated vr t a =25 i r 0.23 t a = 125 0 . 20 0 . 24 0.32 0.36 www.goodark.com 1/4 2014.03-rev.a
sgc1045s surface mount schottky rectifier reverse voltage 45v forward current 10a www.goodark.com 2/4 2014.03-rev.a ratings and characteristics curves ( ta = 25 unless otherwise noted ) figure ? 2. ? typical ? instantaneous ? forward ? characteristics ? figure ? 1.forward ? current ? derating ? curve figure ? 4. ? typical ? reverse ? characteristics ? figure ? 3. ? typical ? junction ? capacitance figure ? 5.maximum non \ repetitive ? peak ? forward ? surge ? current www.goodark.com 2/4 2014.03-rev.a
sgc1045s surface mount schottky rectifier reverse voltage 45v forward current 10a www.goodark.com 3/4 2014.03-rev.a package outline dimensions in inches (millimeters) min max min max dim unit: mm unit: inch min max min max he 6.4 6.6 0.252 0.260 e 5.6 5.8 0.220 0.228 d 4.1 4.3 0.161 0.169 b1 1.7 1.9 0.067 0.075 b2 0.8 1 0.031 0.039 a 1.05 1.2 0.041 0.047 c 0.3 0.4 0.012 0.016 c 0.3 0.4 0.012 0.016 l 0.85 1.1 0.033 0.043 l1 4.2 4.4 0.165 0.173 l2 l3 1.1 1.4 0.043 0.055 d1 3 3.3 0.118 0.130 e1 3.52 typ. 0.139 typ. 1.86 typ. 0.073 typ. soldering ?? footprint packing information packing quantities: 5000 pcs/reel 12mm tape, 13" reel 5000 pcs/ ee tape & reel specification www.goodark.com 3/4 2014.03-rev.a
sgc1045s surface mount schottky rectifier reverse voltage 45v forward current 10a www.goodark.com 4/4 2014.03-rev.a disclaimers these materials are intended as a reference to assist our customers in the selection of the suzhou good-ark product best suited to the customer?s application; they do not convey any license under any intellectual property rights or any other rights belonging to suzhou good - ark electronics co ltd or a intellectual property rights , or any other rights , belonging to suzhou good - ark electronics co ., ltd . or a third party. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, or infringement of any third-party ? s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. all information contained in these materials including product data diagrams charts programs and all i n f orma ti on con t a i ne d i n th ese ma t er i a l s, i nc l u di ng pro d uc t d a t a, di agrams, c h ar t s, programs an d algorithms represents information on products at the time of publication of these materials, and are subject to change by suzhou good-ark electronics co., ltd. without notice due to product improvements or other reasons. it is therefore recommended that customers contact suzhou good-ark electronics co., ltd. or an authorized suzhou good-ark electronics co., ltd. for the latest product information before purchasing a product listed herein. the information described here may contain technical inaccuracies or typographical errors. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by suzhou good-ark electronics co., ltd. by various means, including our website home page. (http://www.goodark.com) when using any or all of the information contained in these materials, including product data, diagrams, charts , p ro g rams , and al g orithms , please be sure to evaluate all information as a total s y stem before charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. the prior written approval of suzhou good-ark electronics co., ltd. is necessary to reprint or reproduce in whole or in part these materials. please contact suzhou good-ark electronics co., ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.03-rev.a
|
